Power supply | PoE+ according to IEEE 802.3at, class 4 |
Operation temperature: | 0 °C to +45 °C |
Storage temperature: | -10 °C to +70 °C |
Humidity: | 10% to 90% (non-condensing) |
These devices are suitable for connection
The existing interfaces may only be used for appropriate purposes as follows:
Symbol | Use |
PRI 1…PRI 4 | RJ45 (modular jack 8P8C) connector for ISDN primary multiplex interface |
ETH0, ETH1 | RJ45 (modular jack 8P8C) connector for Ethernet (LAN) |
Please click here to view our quick installation guide for innovaphone gateways and analog adapters.
PIN | Pinout |
PIN 1 | Receive + |
PIN 2 | Receive - |
PIN 3 | TX + |
PIN 4 | TX - |
Contact the specialist dealer in case of warranty. Improper use voids warranty.
The serial numbers and the hardware versions for these devices can be found underneath the respective device.
These devices can send data to innovaphone. The settings can be changed to prevent this. The data is processed according to the innovaphone privacy policy.
For further information: www.innovaphone.com.
Errors and omissions excepted. Technical specifications and delivery times may be subject to change.
The company innovaphone AG, Umberto-Nobile-Straße 15, 71063 Sindelfingen, Germany, declares its sole responsibility that the products below comply with the basic requirements and other relevant provisions of the EMC directive 2014/30/EU and the RoHS directive 2011/65/EG when used properly. The following standards have been applied:
Products:
Directives and Standards Applied:
Sindelfingen - March 28th, 2022
Carsten Bode - Head of Development